Step 1:

Pick out a desired spot for SLRP

Step 2:

Lay down SLRP on top of the grass where you ultimately want it to go. Take a spade or a shovel and mark the edge of SLRP in the grass.

Step 3:

Dig down approximately 2". When properly dug SLRP will fit in the hole and be even or slightly below ground level.

Step 4:

Fill the hole with the rubber fill that is provided with the SLRP

Step 5:

Put SLRP over the rubber fill and pound SLRP pad into place using a rubber mallet.